LSC043I20-MP-V1 4.3 inch TFT-LCD Module 480×800 16.7M Colors ST7701SN Driver MIPI DSI 2-Lane Interfa
LSC043I20-MP-V1 4.3 inch TFT-LCD Module 480×800 16.7M Colors
1. Executive Summary & Product Positioning
The LSC043I20-MP-V1 is a 4.3-inch transmissive type a-Si TFT-LCD (amorphous silicon thin film transistor liquid crystal display) module developed by 立信（万安）智显科技有限公司 (Lesson Smart Display Technology Co., Ltd). The panel size is 4.3 inch and the resolution is 480(RGB)×800, the panel can display up to 16.7M colors. This module is a COG (Chip-on-Glass) + FPC + B/L (Backlight) construction with a product specification revision of 1.0.
Product Positioning: This 4.3-inch module is well-suited for a wide range of applications requiring a medium-sized, high-resolution display with a wide viewing angle. It is ideal for handheld devices, industrial control panels, smart home terminals, portable instruments, and other embedded display systems.
2. Detailed Product Overview & Architecture
The module's architecture is designed for robust performance and easy integration. The primary components include:
- TFT-LCD Panel: 4.3-inch diagonal, a-Si TFT active matrix, transmissive, IPS (In-Plane Switching) with full viewing direction. Resolution is 480(RGB) × 800 pixels.
- Driver Circuit: The module integrates the ST7701SN driver IC, communicating via a MIPI DSI (2-Lane) interface.
- Backlight Unit (B/L): A white LED backlight with LEDs configured in series. The typical driving condition is IF=40mA, VF=16V(TYP).
- Mechanical Construction: COG (Chip-on-Glass) + FPC + B/L. The LCM outer dimension is 69.90 × 108.30 × 4.06 mm.
- Interface: The module communicates via a 25-pin FPC connector. The display interface is MIPI DSI 2-Lane.
- Display Mode: Transmissive, IPS.
- Viewing Direction: Full viewing angle (IPS).
- RoHS: All materials are compliant with RoHS standards.
3. Exhaustive Technical Specifications
3.1 General & Mechanical Specifications
| Item | Specification |
| Display Size (Diagonal) | 4.3 inches |
| Resolution (Dots) | 480(RGB) × 800 |
| Display Technology | Active Matrix TFT, Transmissive, a-Si, IPS |
| Module Construction | COG+FPC+B/L |
| Color Depth | 16.7M Colors |
| Input Data Interface | MIPI DSI (2-Lane) |
| Driver IC | ST7701SN |
| Module Size (H×V×D) | 69.90 × 108.30 × 4.06 mm |
| Active Area (H×V) | 56.16 × 93.60 mm |
| Display Mode | Transmissive, IPS |
| Viewing Direction | Free (Full - IPS) |
| Backlight Type | White LED Series |
| Operating Temperature | -20°C to +70°C |
| Storage Temperature | -30°C to +80°C |
| Environmental Compliance | RoHS |
3.2 Absolute Maximum Ratings
Stress beyond those listed may cause permanent damage to the device.
| Item | Symbol | Min | Max | Unit | Remark |
|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | 3.6 | V | Note1 Note2 |
| Supply voltage | IOVCC | -0.3 | 3.6 | V | Note1 Note2 |
| Operating temperature | TOPR | -20 | 70 | °C | Note1 Note2 |
| Storage temperature | TSTR | -30 | 80 | °C | Note1 Note2 |
3.3 Electrical Characteristics
VDDI=1.8V, VDD=2.8V, AGND=DGND=0V, Ta=25°C
| Item | Symbol | Min | Typ | Max | Unit | Remark |
|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.5 | 2.8 | 3.6 | V | Note1 |
| Supply voltage (I/O) | IOVCC | 1.65 | 1.8 | 3.3 | V | Note1 |
| Input Voltage L level | VIL | VSS | — | 0.3×IOVCC | V | Note1 |
| Input Voltage H level | VIH | 0.7×IOVCC | — | IOVCC | V | Note1 |
| LCD Drive Power current | ILCD | — | TBD | — | mA |
3.4 Backlight Circuit
| Parameter | Symbol | Typ | Unit |
|---|---|---|---|
| Backlight forward current | IF | 40 | mA |
| Backlight forward voltage | VF | 16.0 | V |
3.5 Electro-Optical Characteristics
Measurement setup: CA310 / TOPCON CS2000, 50 cm distance, field = 1°
| Item | Symbol | Condition | Min. | Typ. | Max. | Unit | Remark |
|---|---|---|---|---|---|---|---|
| Response time (Rise+Fall) | Tr+Td | θx=θy=0° | — | 25 | 35 | ms | Note 1 |
| Contrast Ratio | CR | θx=θy=0° | 700 | 1000 | — | — | Note 2 |
| Transmittance | T% | θx=θy=0° | — | 5.3 | — | % | |
| Color Chromaticity (White) CIE1931 | Wx | θx=θy=0° | — | 0.304 | — | — | |
| Color Chromaticity (White) CIE1931 | Wy | θx=θy=0° | — | 0.345 | — | — | |
| Viewing Angle (Top) | θT | CR > 10 | — | 80 | — | Deg. | Note 3 |
| Viewing Angle (Bottom) | θB | CR > 10 | — | 80 | — | Deg. | Note 3 |
| Viewing Angle (Left) | θL | CR > 10 | — | 80 | — | Deg. | Note 3 |
| Viewing Angle (Right) | θR | CR > 10 | — | 80 | — | Deg. | Note 3 |
Note 1: Viewing angle is the angle at which the contrast ratio is greater than 10. Determined for the horizontal (3,9 o'clock) and vertical (6,12 o'clock) directions with respect to the optical axis normal to the LCD surface.
Note 2: Contrast measurements at viewing angle of Θ=0° and at the center of the LCD surface. CR = Luminance(white) / Luminance(black).
Note 3: Color chromaticity coordinates calculated from spectral data with all pixels in red, green, blue and white. Measurements at the center of the panel.
4. Interface & Pin Description
4.1 Pin Description (25-pin FPC Connector)
| Pin No. | Symbol | I/O | Description |
|---|---|---|---|
| 1 | LEDA | P | Power for LED backlight anode |
| 2 | LEDK | P | Power for LED backlight cathode |
| 3 | LEDK | P | Power for LED backlight cathode |
| 4 | IOVCC | P | Power Supply (I/O) |
| 5 | VDD | P | Power Supply |
| 6 | TE | O | Tearing effect signal to synchronize MCU to frame memory writing |
| 7 | RESET | I | External reset input |
| 8 | GND | P | Ground |
| 9 | NC | — | No connection |
| 10 | NC | — | No connection |
| 11 | GND | P | Ground |
| 12 | NC | — | No connection |
| 13 | NC | — | No connection |
| 14 | GND | P | Ground |
| 15 | CLKN | I | MIPI DSI differential clock pair (-) |
| 16 | CLKP | I | MIPI DSI differential clock pair (+) |
| 17 | GND | P | Ground |
| 18 | D0P | I | MIPI DSI differential data pair 0 (+) |
| 19 | D0N | I | MIPI DSI differential data pair 0 (-) |
| 20 | GND | P | Ground |
| 21 | D1P | I | MIPI DSI differential data pair 1 (+) |
| 22 | D1N | I | MIPI DSI differential data pair 1 (-) |
| 23 | GND | P | Ground |
| 24 | NC | — | No connection |
| 25 | NC | — | No connection |
5. Mechanical Drawing Reference
The module outline dimension is 69.90 mm (H) × 108.30 mm (V) × 4.06 mm (D). The active area measures 56.16 mm (H) × 93.60 mm (V). The module uses COG (Chip-on-Glass) + FPC + B/L construction with a 25-pin FPC connector for the MIPI DSI interface.
6. Quality & Reliability
The LSC043I20-MP-V1 module is manufactured in accordance with rigorous quality standards. The inspection standards are based on GB/T 2828-2003 (normal inspection, Class II) with defined Acceptable Quality Levels (AQL) for major and minor defects. Detailed criteria for glass defects, LCD appearance defects (viewing area), polarizer defects, and electrical anomalies are specified in the product specification.
Reliability: The module is designed to operate reliably within a temperature range of -20°C to +70°C and can be stored in temperatures from -30°C to +80°C.
7. Ordering Information & Compliance
Model Number: LSC043I20-MP-V1
Revision: 1.0
RoHS Compliance: This product is fully compliant with RoHS environmental standards, ensuring all materials and manufacturing processes adhere to the restriction of hazardous substances.
Manufacturer: 立信（万安）智显科技有限公司 (Lesson Smart Display Technology Co., Ltd)